- Power Supply & LED driver
- Adaptor AC-DC
- Voltage Stabilizer,Regulator,UPS
- LED Light
- Power Inverter DC-AC
- Cable Accessory
120W Quad Output Switching Power Supply
Technical Data
Index Type |
Q-120A |
Q-120B |
Q-120C |
|||||||||
DC Voltage |
5V |
12V |
-5V |
-12V |
5V |
15V |
-5V |
-15V |
5V |
12V |
24V |
-12V |
Voltage Adjust Range |
+10-5% |
|
|
|
+10-5% |
|
|
|
+10-5% |
|
|
|
Voltage Tolerance |
±2% |
±6% |
±6% |
±6% |
±2% |
±10.5% |
±6% |
±10.5% |
±2% |
±6% |
±6% |
±6% |
Rated Current |
11A |
4A |
1A |
1A |
10A |
3.5A |
1A |
1A |
8A |
2A |
2A |
1A |
Current Range |
2-12A |
0.5-5A |
0.2-1A |
0.2-1A |
2-12A |
0.5-5A |
0.2-1A |
0.2-1A |
2-12A |
0.2-3A |
0.2-2A |
0.2-1A |
Rated Power |
120W |
122.5W |
124W |
|||||||||
Efficiency |
77% |
76% |
80% |
|||||||||
Ripple&Noise(Max.) |
80mvp-p |
120mv |
80mv |
120mv |
80mv |
150mv |
80mv |
150mv |
80 mv |
120 mv |
180mv |
120 mv |
Line Regulation |
±0.5% |
±1% |
±1% |
±1% |
±0.5% |
±1% |
±1% |
±1% |
±0.5% |
±1% |
±1% |
±1% |
Load Regulation |
±0.5% |
±5% |
±5% |
±5% |
±0.5% |
±6% |
±5% |
±6% |
±0.5% |
±5% |
±5% |
±5% |
Voltage Range |
88-132VAC/176-64VAC 47-63Hz 240-370VDC |
|||||||||||
Ac Current |
2.5A/115V1.25A/230V |
|||||||||||
Inrush Current(Max.) |
cold start current3.5A |
|||||||||||
Leakage Current |
<3.5mA/240VAC |
|||||||||||
Overload Protection |
105%-135% output cutout auto recovery |
|||||||||||
Over-voltage Protection |
115%-135% |
|||||||||||
Over-temperature Protection |
-- |
|||||||||||
Temp.Coefficient |
±0.03%/℃(0-50℃) |
|||||||||||
Setup.Rise,Hold Time |
200ms 50ms 20ms |
|||||||||||
Withstand Voltag |
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC |
|||||||||||
Isolated Resistor |
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC |
|||||||||||
Storage Temp.Humidity |
-10℃-60℃,20%-90%RH |
|||||||||||
Weight |
0.80 Kg |
|||||||||||
Safety Standards |
UL1012 TUVEN60950 US950 |
|||||||||||
EMC |
CLSPR22(EN55022) ,CLASSB BIEC801-2,3,4,IEC555-2 |
Note:
1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance,line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100%