1000W Single Output Switching Power Supply S-1000

Technical Data

MODEL		S-1000-12	S-1000-24	S-1000-27	S-1000-36	S-1000-48	S-1000-60
OUTPUT	DC VOLTAGE	12V	24V	27V	36V	48V	60V
	RATED CURRENT	80A	40A	37A	27A	20A	17A
	CURRENT RANGE	0 ~ 80A	0 ~40A	0 ~ 37A	0 ~ 27A	0 ~ 20A	0 ~ 17A
	RATED POWER	1000W	1000W	1000W	1000W	1000W	1000W
	RIPPLE & NOISE (max.)	240mVp-p	240mVp-p	240mVp-p	260mVp-p	280mVp-p	300mVp-p
	VOLTAGE ADJ.RANGE	20 ~ 26.4V	20 ~ 26.4V	26 ~ 32V	33 ~ 39V	44 ~ 52V	56 ~ 66V
	VOLTAGE TOLERANCE	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	SETUP, RISE, HOLD TIME	200ms, 50ms, 20ms at full load
INPUT	VOLTAGE RANGE	90-132VAC /180-264VAC by switch
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	84%	84%	84%	86.0%	87.0%	88%
	AC CURRENT	15A/115V 7.5A/230V
	INRUSH CURRENT (max.)	20A/115V 40A/230V
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 135% of rate load
	OVERLOAD	Protection type : Fold back current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	13.8 ~ 16.2V	27.6 ~ 32.4V	32 ~ 37V	39~ 48V	52 ~65V	66 ~ 89V
	OVER VOLTAGE	Protection type : Hiccup mode, recovers automatically after fault condition is removed.
	FAN CONTROL,O.T.P.	RTH1 or RTH250ºC FAN ON,45ºC FAN, 70ºC output shut down
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC, 20 ~ 90% RH non-condensing
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	Design refer to UL1950, TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,Light industry level,criteria A
Others	DIMENSION	29113268mm (LWH)
Others	WEIGHT	2.65 Kg

Note：
1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance,line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100%

Return